When the door itself is the problem - not just the lock - you need a locksmith who carries closers, hinges, panic hardware, thresholds, and mortise mechanisms on the van. We do all of it across PSL, Stuart, Fort Pierce, and the Treasure Coast.
Doctor Lockout handles 20+ door-hardware repairs across Port St. Lucie - closers, hinges, panic bars, mortise locks, multi-point systems, storefront hardware, and threshold replacement. Mobile only. Most repairs finished in one visit.
Residential or commercial. Wood, hollow-metal, aluminum, or fiberglass. We carry LCN, Norton, Dorma, Detex, Von Duprin, Adams Rite, and Pemko hardware on the van so we don't bounce back to the supply house.
Upfront pricing on the phone, $120-$680 per door depending on hardware. Call (772) 284-5142.
Three-quarters of our commercial calls in Port St. Lucie start as 'the lock is broken' and end as 'actually the closer is shot' or 'the panic-bar latch wore through' or 'the mortise body is failing.' Door hardware fails in patterns most general handymen do not recognize, and the wrong diagnosis means the wrong fix.
An LCN 4040 closer that is slamming hard enough to make customers flinch is not a closer-replacement job - it is a $185 speed and latch adjustment. A panic bar that is sticking is not a bar replacement - it is a $140 touchpad repair. A storefront Adams Rite that won't actuate is not a new door - it is a $280 mortise swap that takes thirty minutes.
Twenty-plus door-hardware services, all on the van, finished in one visit. (772) 284-5142.
LCN, Norton, Dorma closers; Detex, Von Duprin, Sargent panic; Adams Rite storefront; Pemko thresholds; Stanley + Roton hinges. All loaded, all the time.
Most door-hardware calls are adjustment or rebuild jobs, not full replacement. We quote both options when both apply and pick the right one for the actual problem.
UL-listed panic hardware on rated openings, documented with model + label + install date for your inspection paperwork. We have worked PSL/Fort Pierce/Stuart fire-marshal cycles for years.
Daytime commercial dispatch 30-60 minutes anywhere in PSL/Stuart/Fort Pierce. Most door-hardware jobs complete in one visit because parts ride with us.
Many 'door problems' are actually lock problems disguised, and vice versa. Single-vendor trained on both means faster correct diagnosis, no specialist handoff.
Text us a photo of the door and we will give you a phone quote with realistic confidence. Quote stands once on-site verifies what the photo showed.
Door companies sell doors - new slabs, new frames, full assemblies. Locksmiths fix the hardware on the doors you already have. Two different trades, two different markups.
Door companies' incentive structure pushes replacement quotes. Locksmith incentive structure pushes repair-first because the inventory is on the van and the labor is half a day, not three days.
ALOA-track training covers door hardware as a primary domain. General handymen learn it informally; door companies' installers learn it via on-the-job rotation from new-construction work.
A door-hardware quote from a handyman or door company typically requires a second visit after they 'go pick up the part.' Our van already has LCN, Norton, Detex, Adams Rite, Pemko - so the visit ends with the door working.
We document UL labels, model numbers, install dates, and chain-of-custody for compliance paperwork. Door companies sometimes do; handymen rarely do.
Most homeowners and property managers call a locksmith for a lock, then discover the real problem is the door itself - the closer is slamming, the hinges are sagging, the panic bar is jammed, or the mortise latch has worn out and the lock just happens to be the symptom. Three-quarters of our commercial calls in Port St. Lucie end up being door hardware work, not lock work.
The reason we can show up and finish in one visit is the van loadout: LCN 4010 and 4040 series closers, Norton 1601/1604, Dorma 8616, Detex Value-Series and Advantex panic hardware, Von Duprin 99/22 series, Adams Rite MS1850S and 4900 deadlatches for storefronts, Pemko thresholds and sweeps, Stanley FBB179 and FBB191 commercial hinges in standard sizes, and Andersen / Pella / Marvin multi-point lock service kits. If the part is on the van the price you got on the phone is the price you pay.
Each link below opens a deeper page with PSL-specific notes, pricing, and process. Don't see what you need? Call (772) 284-5142 and describe the door - we'll tell you over the phone.
Residential. Front-entry doors, interior passage doors, sliding-glass patio doors, attached-garage pedestrian doors, gates. Most residential work is bored cylindrical and tubular lock service, deadbolt installs, sliding-door latch service, and multi-point system rebuilds on the higher-end Andersen / Pella / Marvin entry doors common in Tradition and the Magnolia Lakes / St Lucie West developments.
Commercial. Storefront aluminum doors with Adams Rite mortise locks, hollow-metal fire-rated doors, panic hardware compliance for fire-marshal sign-off, continuous and pivot hinges, overhead and concealed closers, threshold and weather-seal replacement. This is the bulk of our daytime work across the PGA Plaza / Tradition Square / Riverwalk plazas and the Port St Lucie Boulevard storefronts.
Fire-rated and life-safety. UL fire-rated assemblies have legal compliance requirements - we install only UL-listed hardware on rated openings and document the labels for your fire marshal inspection. Panic hardware on public-egress doors is mandatory in Florida; we install Detex, Von Duprin, and Sargent and most single-door jobs finish under $720 including hardware.
| Service | Typical Price | Notes |
|---|---|---|
| Door closer adjust or repair (existing) | $120 - $185 | LCN, Norton, Dorma. Speed, latch, hold-open. |
| Door closer replace (new hardware) | $280 - $440 | Surface-mounted, includes hardware. LCN 4040, Norton 1601. |
| Concealed / overhead closer service | $240 - $560 | More labor; older aluminum storefronts. |
| Continuous hinge repair / replace | $320 - $640 | Per door. Geared full-height. |
| Pivot hinge service (top + bottom) | $280 - $580 | Storefront pivots, includes alignment. |
| Panic bar install (new hardware) | $420 - $720 | Detex / Von Duprin / Sargent + labor. |
| Panic bar repair (existing) | $140 - $320 | Touch pad, dogging mechanism, latch. |
| Mortise lock body replace | $240 - $520 | Residential or commercial. Includes hardware. |
| Storefront Adams Rite MS1850S replace | $280 - $480 | Aluminum-frame glass doors. |
| Sliding-glass door latch / foot-bolt | $95 - $185 | Patio sliders, common Tradition / SLW. |
| Threshold + sweep replace | $160 - $320 | Per door, includes Pemko hardware. |
| Multi-point lock rebuild (Andersen/Pella) | $220 - $480 | 3-point and 5-point systems. |
| Need | Doctor Lockout mobile | Door installer / handyman | DIY |
|---|---|---|---|
| Comes to your PSL address | Yes - mobile | Yes - usually estimate only first visit | Yes |
| Carries closers, hinges, panic hardware on van | Yes | No - quotes first then orders | You buy |
| Fire-code compliant install + documents labels | Yes | Sometimes | No |
| Same-day finish on most jobs | Yes | No - typically 2-3 visits | Variable |
| Quoted price held on-site | Yes | Often estimate then upcharge | N/A |
Real person on the phone in under 2 rings. Locksmith on-site in 15-30 minutes. Honest price before any tools come out.
Call (772) 284-5142Van-stocked. LCN and Norton closers in the common sizes, Detex and Von Duprin panic hardware, Adams Rite MS1850S mortise locks for storefronts, Stanley commercial hinges, Pemko thresholds and sweeps. If you describe the door on the phone we can almost always finish in one visit with no separate parts trip.
Door hardware - closers, hinges, panic bars, mortise locks, thresholds - is a core locksmith trade. ALOA training covers it. A locksmith license is required in Florida for this work; we're licensed and insured. You'd call a 'door company' if you're replacing the entire door slab or frame - that's our scope ends.
We install UL-listed panic hardware on rated openings and document the UL label, model number, and install date for your inspection. We're not the AHJ ourselves - the fire marshal does the actual sign-off - but our install paperwork is what they'll want to see, and we've worked the Port St Lucie / Fort Pierce / Stuart fire-marshal inspection cycle for years.
Daytime in city limits, typically 30-60 minutes. After-hours we still dispatch 24/7 but most door-hardware work waits for daytime because we want light and the right loadout. If a door won't secure overnight we can also do a temporary secure-down and finish hardware the next morning.
Yes - sliding-glass door latch service, foot-bolt installs, and the older mortise-style sliding door locks common on the original-build Tradition and Magnolia Lakes patio doors. Most jobs $95-$185 in one visit.
About 60% of door closer calls in PSL are adjustment or seal-kit repairs ($120-$185) rather than replacement. We'll tell you on-site whether the existing closer is rebuildable or whether the hydraulic body has failed and replacement is the right call. We don't push replacement when a repair will hold.
Door repair calls cover the whole Treasure Coast. Highest-volume zones for commercial door hardware: PSL Boulevard, Tradition Square plazas, Village at PGA Verano, US-1 corridor in Stuart and Jensen Beach, downtown Fort Pierce. Residential sliding-door and multi-point system work concentrates in:
Last updated: 2026-05-18
